Review of Manttra Pressure Cooker Parts Review
Top Pick
1. Manttra GSKT100 pressure cooker gasket.
- Brand: Manttra
- Manufacturer: Manttra
- Color: Black
Features
- Fits Manttra pressure cooker models 10520, 16600, 16630, 16400
- 16700, A01001, A01061, A01062, A01065, A01074, A01081
- Also fits Manttra pressure cookers without any code number stamped underneath
Best Quality
2. Mity rain Universal Replacement 1pc Floater and 3pcs Sealer for …
- Brand: Mity rain
- Manufacturer: Mity rain
- Color: (1+3)Pack
Features
- ✅ Silicon Gasket is often washed off, leaving the Floating Vale loose and the pressure cooker unusable because the steam leaks,This spare part can make your disabled cooker work like new
- ✅ Floater and sealer is are essential for pressure cooker to work Under normal situation, floater inserts into the lid from outside to inside. The sealer locks the floater from inside, keeping the floater in place
- ✅ This Floater and Silicon Gasket fits most models of the Power Pressure Cooker including but not limiting the XL (6 & 8 Quart), YBD60-100, PPC780, PPC770, PPC790, PCXL-PRO6, PC-TRI6, and PC-WAL1
- Package Content: 1 floater vale and 3 silicon gasket,Size：0.75*0.35inch and 0.47*0.12inch
Recommended
3. 9 Inch Fagor Pressure Cooker Replacement Gasket (Pack of 2) …
- Brand: IMPRESA
- Color: Silver
- Dimensions: Height: 0.5 Inches Width: 9.0 Inches Length: 9.0 Inches
Features
- 9″ replacement for many 9″ diameter Fagor pressure cooker sealing rings when worn/dried-out or when elasticity is lost (or every 12-18 months), per Fagor instructions. Made from high-quality, durable, food-grade silicone. This is a pack of 2 sealing rings. Comparable to Fagor unit # 998010188
- Important Compatibility Information: To ensure compatibility, measure your old gasket and pressure cooker pot. The old gasket should have an inner diameter of approximately 8.5″ and an outer diameter of approximately 9.5″. The pot should be approximately 9 inches (22.86 cm) in diameter. Please contact us through our seller page or ask a question if you are unsure about the fitment and compatibility
- Compatible with many (but not all) Fagor single unit pressure cookers (4, 6 and 7 quart) and pressure cooker sets (4/6 quart and 4/7 quart), including Rapida, Rapid Express, Duo / Cook’s Essentials, Ucook, Multirapid Plus, Splendid-Weighted, Express, Futuro, Elite and Splendid
- Important Non Compatibility Information: Gasket Does Not Fit any of the following – Does not fit 8 quart and the 10 quart single unit cookers, 4/8 quart cooker sets, pressure cooker/fryer (with clamp-down lid), or electric cookers, including Electric Multi Cooker, Premium Pressure Cooker (6/8 quart) and Lux Multi-Cooker (4/6/8 quart and white)
- Only For Fagor – Not For Use With Other Pressure Cooker Brands. Comparable to Fagor unit # 998010188. This pressure cooker replacement gasket is an aftermarket replacement product (produced by Impresa)
4. Manttra GSKT110 Pressure Cooker Gasket Seal
- Brand: Manttra
- Manufacturer: Manttra
- Color: black rubber
- Dimensions: Weight: 0.31 Pounds `
Features
- Manttra GSKT110 pressure cooker gasket seal
- Fits Manttra pressure cooker models 22870, 22871, 38270, 78270, 38329, 38330, 38283, 39001
- Manttra replacement part
5. Manttra GSKT105 Pressure Cooker Gasket Seal
- Brand: Manttra
- Color: Black
- Dimensions: Weight: 0.24 Pounds `
Features
- Manttra GSKT105 pressure cooker gasket seal
6. Pressure Cooker Replacement gasket for Mirro Pressure Cooker S-9892 9892 …
- Brand: JIOTAR
Features
- Our pressure cooker gasket are made from high-quality, durable, food-grade silicone, Factory sealed and individually wrapped.
- Replacement pressure cooker gasket for select 4, 6 and 8 quart pressure cooker,replacement mirro pressure cooker Part Numbers: S-9892, S9892, 9892. Fits Mirro models (may be partial list): M-0296, M-0436, M-0498, M-0536, M-0596, M-0598, M-0646, M-1952, M-1956 (Includes models with -11, -35, etc. such as M-0536-11).
- Pressure cooker rubber gasket Dimensions :Outside Diameter:10.08″ , Diameter : 10″ ,Thickness: 0.4″ . All dimensions are approximate considering gaskets can stretch or shrink to fit specific lids.
- PLEASE NOTE: Not suitable for S9882, nor suitable for righr,Fargor pressure cooker seals.
- Simple to install : To ensure compatibility, measure your old gasket and pressure cooker pot. pressure cooker sealing rings are manufactured to arrive up to 1″ too large to be resilient to normal shrinkage. soaking your gasket for pressure cooker in warm water for 10 minutes before installing it can increase pliability.
7. Pressure Cooker Jigger Valve for Weight Pressure Control 80KPA Universal …
- Brand: Lenmu Mica
- Manufacturer: Lenmu Mica
- Dimensions: Weight: 0.15211896078 Pounds `
Features
- Material: stainless steel and plastic
- Dimensions: Inner diameter of the inner hole at the bottom is about 0.39inch/10~10.5mm, outer size is 1.06inch*1.37inch/ 2.7cm * 3.5cm, weight 0.15pounds/69g
- Necessity: The Pressure Cooker Jigger Valve is an essential accessory for normal and safe operation of the pressure cooker
- Scope of application: It is suitable for the pressure cooker with the central diameter of the pot cover within 10mm and the working pressure value of 80kPa, and the special accessories of 80kPa aluminum alloy pressure cooker
- Note: Before ordering, please confirm the pressure value and size of your pressure cooker to ensure that it fits your pressure cooker and works properly and safely.
8. TIHOOD 3PCS Universal Pressure Cooker Relief Jigger Valve 1.5 Inch …
- Brand: TIHOOD
- Manufacturer: TIHOOD
- Color: Black
- Dimensions: Weight: 0.27998707274 Pounds `
Features
- Product Name : Jigger Valve for Pressure Cooker;Material : Metal, Plastic
- Color : Black, Silver Tone;External Size (Approx) : 2.6 x 3.8cm/1″x 1.5″(D*H)
- Bottom Hole Dia. : 10mm / 0.4″
- Weight : 127g
- Package : 3 x Jigger Valve for Pressure Cooker
9. Pressure Cooker Jigger Valve, Universal Pressure Cooker Relief Jigger Valve …
- Brand: SENLIXIN
Features
- ✔ | WIDE COMPATIBILITY | – The valve is suitable for the pressure cooker with the central diameter of the pot cover within 10mm and the working pressure value of 80kPa.
- ✔ | PRODUCT DIMENSION | – Outer size is 27*37mm/1.06*1.45inch. Diameter of bottom hole: 10mm/0.4inch.
- ✔ | NECESSITY | – The Pressure Cooker Jigger Valve is an essential accessory for normal and safe operation of the pressure cooker.
- ✔ | HIGH QUALITY MATERIAL | – The valve is made of high quality alloy metal.
- ✔ | KINDLY NOTE | – Before ordering, please confirm the pressure value and size of your pressure cooker to ensure that it fits your pressure cooker and works properly and safely.
10. Hawkins B1010 3 Piece Pressure Cooker Safety Valve – B1010-3pcSet
- Brand: HAWKINS
- Manufacturer: PVCS Inc.
- Color: Silver
- Dimensions: Height: 0.8 Inches Width: 0.8 Inches Length: 1.0 Inches Weight: 0.0110010668738 Pounds `
Features
- Hawkins Safety Valve
- Suitable for Hawkins Pressure Cooker
- Genuine Product from Hawkins
- Well Designed
- Made in India